Turn Signal To Brake Light Conversion Module WITH RUNNING LIGHTS
Also includes Dual-Load Equalizer
The Tri-Star XP module converts the rear turn signal lights to function as brake and turn signal lights...and also has Running Light Capabilities!
When the brakes are applied, the turn signal lights illuminate. If a turn signal is applied, it has priority over the brake light function on the side that is selected. If the turn signal is canceled and the brakes are still applied, the brake light function of the turn signal lights illuminate steady on.
Tri-Star XP Features:
- Adds brake light function to existing turn signals
- Dependable Solid-state electronic components.
- Weather Proof - potted with soft cell technology to prevent wire chaffing and damage.
Tri-Star XP Specifications:
- Voltage: 12 VDC Switched
- Negative Ground.
- Max Load Capacity: 6 amps per left or right channel.
Dimensions: 2 1/4 in. L x 1 5/8 in. W x 5/8 in. H
Mounting: Secure to flat surface with double sided VHB tape (included).
Function Check:
Applying the brakes will cause the rear Turn Signals to light as long as the brakes are held. If a turn signal is sent to the rear lights at the same time it will have priority over the brake lights and cause the corresponding light to flash. When the turn signal is canceled the brake light will resume.
DUAL LOAD EQUALIZER:
This Dual-Load Equalizer is designed to fix the problem when you have changed your stock directionals to L.E.D. turn signals and they flash quickly or not at all.
Dual-Load Equalizers Features:
- Dependable Solid-state electronic components.
- Weather Proof - potted with soft cell technology to prevent wire chaffing and damage.
Dual-Load Equalizer Specifications:
Dimension: 2 1/4 in. L x 1 5/8 in. W x 5/8 in. H
Mounting: It is recommended that the module be mounted in a location not subject to extreme heat conditions.
Secure to flat surface with double sided VHB tape.
|